As you use any knife it will get dull. A hunting knife is a danger and an inconvenience. With a knife you need to use more pressure than should be required to cut which you are currently preparing. Pressure means that in case you slip the pressure can mean a greater chance of cutting yourself and loss of control. A hunting knife allows you to glide through meat or the vegetables that you are cutting with a lot of ease and control.
Perfect Way to Sharpen
The best way to sharpen your hunting knife would be to use a rock. This is a rock which could be manufactured of carborundum or natural. One side will have the other side and a grit using a fine grit. The finer the stone that is wet the smaller the particles are cut away and sharper or the nicer edge which you can create. The Issue is if you Begin with a stone and a knife it requires an extremely long time for a sharp edge.
Using both fine and coarse stone is the way to put a border on to a hunting knife. Generally the knife is drawn round the rock in a circular or figure eight movement. Water is added as required. Work both sides. Make a few moves on one side then switch to another side. When you have established the rough border, switch to the nice stone and replicate the process. This does not take quite a long time. With an excellent rock that is wet you can sharpen a knife to like new condition.
Honing the Edge
Another surprising is that as it gets thin it becomes elastic like aluminum foil. So with regular this foil advantage can be developed by you. If you go to cut with it the foil stinks and then it seems to be boring from doing its job, because the foil is preventing the edge. The solution to this is called honing. Honing is really forcing the foil border to bend back and forth until it breaks off leaving the cutting edge available. There are lots of ways to do this. The conventional method is to use a leather strap. The knives are stroked back and forth across the edge forcing the foil and know more here https://thestuffofsuccess.com/2018/10/29/does-the-knife-matter/. Another way to hone a Knife is to use a rod or steel. These are dragged along the border at a constant angle. The ceramic and the file steel that is difficult will remove the foil border. Diamond grit steels Work the best for this as they cut the knife steel with tough and fine grained.